A thin and light electric blanket that warms up quickly and quickly.INKO using silver nanok
INKO Heating Blanket(インコ ヒーティング ブランケット)
Loore International has launched an INKO HEATING BLANKET, a sheet heater that warms the ink that does not generate electromagnetic waves, on Makuake on September 29.The price is 14,520 yen, and Makuake can purchase from 20%off 11,616 yen (as of September 29).
ブランケットとコントローラーAn INKO series electric blanket that uses the patented electron (Flexible Electronics) developed in -house.Print silver nano -ink, a heat -generated material, on the entire film sheet (TPU film) inside the blanket.The entire film sheet is covered with a microfiber to make a blanket.
1 because silver nano -ink is printed instead of a general heating line.Realizes 5mm thinness.Utilize the characteristics of flexible materials, fold and carry.The size is the maximum of 700 x 1,050mm (width x depth) for the Inko series.It can be hung on a knee or put on from the shoulder, and can be used as a blanket.Suppose that heating goods are active in various places such as home and office.
銀ナノインクをフィルムシート(TPUフィルム)全体に印刷し、そのフィルムシートをマイクロファイバーで覆うことで、ブランケットに仕上げているコンパクトに折り畳めるひざ掛けとして使えるSilver Nano Ink has a high heat -generating efficiency, warms up to 40 ° C in 1 minute, and rises smoothly to 50 ° C, the maximum temperature.It is said that the entire blanket (75%of the total area) can be heated evenly.The part that touches the skin is made of microfiber material and feels good.
The temperature can be set in 4 steps.It is 35 ° C for low -temperature "level 1", 40 ° C for "level 2", 45 ° C for "level 3", and 50 ° C for "level 4".
ブランケット全域(全面積の75%)を、ムラなく均一に温められる肌に触れる部分は、肌触りが良いマイクロファイバー素材を使用In addition to built -in safety devices that automatically turn off in 12 hours, it is equipped with a fire and burn prevention function.The temperature control center to detect the temperature is placed in two places, and the power is distributed for each elapsed time so that there is no overheating at each set temperature, and the temperature is adjusted.Also, it is assumed that there is almost no electromagnetic wave that is concerned about the effects on the body and can be used with confidence.
The body size is 700 x 1,050 x 1.5mm (width x depth x thickness) and weighs about 510g.The size of the controller is 53 x 123 x 35mm (same) and weighs about 297g.The heat generation temperature is about 38-50 ° C.The power supply is AC100-240V.Power consumption is up to 50W.The power cable length is about 2m.The material is microfiber (polyester), ABS, PVC.